國立中央大學教師履歷平台

期刊著作

• Characterization of machined surface in semi-conductive SiC wafer subjected to micro-EDM drilling
  Materials Science in Semiconductor Processing, 187, 2025-03-01
  [ Electric discharge machining,Heat-affected zone,Microstructure,Recast layer,Semi-conductive SiC wafer ]

• Innovative laser-assisted glass bending approaches using a near-infrared continuous wave laser
  Optics and Lasers in Engineering, 178, 2024-07-01
  [ Brittle and hard materials,Glass forming applications,Laser-assisted glass bending,Laser-heated bending scheme,Near-infrared continuous-wave laser ]

• Manufacturing motor core lamination from thin non-oriented silicon steel sheet direct by pulsed laser cutting using multi-quality optimized process parameters
  International Journal of Advanced Manufacturing Technology, 133, 1-2, 199-220, 2024-07-01
  [ Extreme learning machine (ELM),Genetic algorithm (GA),Heat-affected zone (HAZ),Motor core laminations,Multi-quality optimization,Preference selection index (PSI),Pulsed laser cutting,Thin non-oriented silicon steel ]

• Microstructures and mechanical properties of copper-to-glass laser transmission welding employing a nanosecond pulsed laser
  Ceramics International, 50, 12, 21788-21799, 2024-06-15
  [ Bond strength,Cux+-O-Si eutectic compounds,Glass/copper bonding,Laser transmission welding,Microstructures ]

• Effects of TiN content and heat treatment on microstructural changes, mechanical strength, and corrosion resistance in selective laser melting of TiN/AISI 420 composites
  Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 900, 2024-05-01
  [ Additive manufacturing,Anti-Corrosive behavior,Mechanical properties,Metal matrix composite,Microstructure,Thermal processing ]

• Predicting and Enhancing the Multiple Output Qualities in Curved Laser Cutting of Thin Electrical Steel Sheets Using an Artificial Intelligence Approach
  Mathematics, 12, 7, 2024-04-01
  [ curved cut,deep neural network,laser cutting,modified equilibrium optimizer,thin electrical steel sheet ]

• Enhancing mechanical properties of selective-laser-melting TiN/AISI 420 composites through Taguchi GRA and PCA multi-response optimization
  Journal of Materials Research and Technology, 29, 1278-1292, 2024-03-01
  [ Hybrid mixing method,Mechanical properties,Microstructure,Selective laser melting,Taguchi–GRA–PCA,TiN/AISI 420 ]

• Fatigue crack growth behavior of selective laser melted martensitic stainless steel
  International Journal of Fatigue, 179, 2024-02-01
  [ Anisotropy,Elongated cellular structure,Fatigue crack growth,Selective laser melting,Tempering treatment ]

• Machined quality prediction and optimization for micro-EDM drilling of semi-conductive SiC wafer
  Materials Science in Semiconductor Processing, 169, 2024-01-01
  [ Assisting electrode,Deep neural network,Electric discharge machining,Particle swarm optimization,Semi-conductive SiC wafer ]

• Characterizations of laser transmission welding of glass and copper using nanosecond pulsed laser
  International Journal of Advanced Manufacturing Technology, 130, 5-6, 2755-2770, 2024-01-01
  [ Bonding and separation mechanisms,Glass-copper bonding,Heterogeneous junction,Laser transmission welding,Nanosecond pulsed laser ]

• Temperature-Controlled Laser Cutting of an Electrical Steel Sheet Using a Novel Fuzzy Logic Controller
  Mathematics, 11, 23, 2023-12-01
  [ electrical steel,heat affected zone,laser cutting,PID-type fuzzy logic controller,roundness,temperature control ]

• Assessment of glass-to-glass welding by USP lasers with machine learning approaches
  Manufacturing Letters, 35, 160-165, 2023-08-01
  [ Femtosecond lasers,Glass machining,Glass welding,Machine learning ]

• Anisotropic fracture toughness of a selective laser melted martensitic stainless steel
  Engineering Fracture Mechanics, 287, 2023-07-14
  [ Anisotropy,Elongated cellular structure,Fracture toughness,Selective laser melting,Tempering treatment ]

• Enhancing Mechanical and Corrosion Properties of AISI 420 with Titanium-Nitride Reinforcement through High-Power-Density Selective Laser Melting Using Two-Stage Mixed TiN/AISI 420 Powder
  Materials, 16, 11, 2023-06-01
  [ corrosion resistance,microstructure,selective laser melting,TiN/AISI 420 composites,two-stage powder mixing scheme ]

• Tempering Effect on the Anisotropic Mechanical Properties of Selective Laser Melted 420 Stainless Steel
  Journal of Materials Engineering and Performance, 32, 11, 5082-5096, 2023-06-01
  [ anisotropy,build direction,martensitic stainless steel,mechanical property,selective laser melting,tempering treatment ]

• Formation of subsurface Cu-O-Si system through laser-induced plasma-assisted copper penetration for fabricating robust adhesive copper wire on glass substrate
  Applied Surface Science, 609, 2023-01-30
  [ Electroless plating,Laser-induced backward transfer (LIBT),Laser-induced plasma-assisted penetration (LIPAP),Scratch adhesion test,Subsurface Cu-O-Si system ]

• Prediction and optimization of geometrical quality for pulsed laser cutting of non-oriented electrical steel sheet
  Optics and Laser Technology, 149, 2022-05-01

• Prediction and optimization of dross formation in laser cutting of electrical steel sheet in different environments
  Journal of Materials Research and Technology, 18, 1977-1990, 2022-05-01

• A Hybrid PSO–GWO Fuzzy Logic Controller with a New Fuzzy Tuner
  International Journal of Fuzzy Systems, 24, 3, 1586-1604, 2022-04-01

• Controller Design for Unstable Time-Delay Systems with Unknown Transfer Functions
  Mathematics, 10, 3, 2022-02-01

• Automatically tightening tiny screw using two images and positioning control
  Mathematics, 9, 19, 2021-10-01
  [ Coordinate transformation,Image processing,Manipulator ]

• Prediction of kerf width in laser cutting of thin non-oriented electrical steel sheets using convolutional neural network
  Mathematics, 9, 18, 2021-09-01
  [ Convolutional neural network,Kerf width,Laser cutting,Non-oriented electrical steel ]

• Design of optimal controllers for unknown dynamic systems through the nelder–mead simplex method
  Mathematics, 9, 16, 2021-08-02
  [ Inverted pendulum,N–M simplex method,Optimal control,Penalty function,Performance index ]

• Effects of laser spot size on the mechanical properties of aisi 420 stainless steel fabricated by selective laser melting
  Materials, 14, 16, 2021-08-02
  [ AISI 420 stainless steel,Laser spot size,Mechanical properties,Selective laser melting ]

• An improved real-time temperature control for pulsed laser cutting of non-oriented electrical steel
  Optics and Laser Technology, 136, 2021-04-01

• Artificial intelligence-based modeling and optimization of heat-affected zone and magnetic property in pulsed laser cutting of thin nonoriented silicon steel
  International Journal of Advanced Manufacturing Technology, 113, 11-12, 3225-3240, 2021-04-01
  [ Extreme learning machine (ELM),Forecasting,Genetic algorithm (GA),Heat-affected zone (HAZ),Magnetic flux density (MFD),Optimization,Pulsed laser cutting,Silicon steel ]

• Formation of Bottom Conjugate Pair Grooves by Femtosecond Laser Grooving on Transparent Substrate
  IEEE Photonics Technology Letters, 33, 6, 305-308, 2021-03-15
  [ bottom conjugate pair grooves,Femtosecond laser micro-grooving,finite difference time domain (FDTD) ]

• Effects of build direction on the mechanical properties of a martensitic stainless steel fabricated by selective laser melting
  Materials, 13, 22, 1-18, 2020-11-02
  [ Anisotropy,Build direction,Martensitic stainless steel,Mechanical properties,Residual stress,Selective laser melting ]

• An extreme learning machine for predicting kerf waviness and heat affected zone in pulsed laser cutting of thin non-oriented silicon steel
  Optics and Lasers in Engineering, 134, 2020-11-01
  [ Extreme learning machine (ELM) , Heat affected zone (HAZ) , Kerf waviness , Pulsed laser cutting , Random forests method , Thin non-oriented silicon steel sheet ]

• Mechanical durability of solid oxide fuel cell glass-ceramic sealant/steel interconnect joint under thermo-mechanical cycling
  Renewable Energy, 138, 1205-1213, 2019-08-01
  [ Glass-ceramic sealant , Interconnect , Joint , Solid oxide fuel cell , Thermo-mechanical cycling ]

• Conductive characteristics of indium tin oxide thin film on polymeric substrate under long-term static deformation
  Coatings, 8, 6, 2018-06-01
  [ Electrical conductance , Indium tin oxide , Polyethylene naphthalate , Polyethylene terephthalate , Static bending ]

• Creep rupture of the joint between a glass-ceramic sealant and lanthanum strontium manganite-coated ferritic stainless steel interconnect for solid oxide fuel cells
  Journal of the European Ceramic Society, 38, 5, 2417-2429, 2018-05-01
  [ Creep , Glass-ceramic sealant , Interconnect , Joint , Solid oxide fuel cell ]

• DEM simulation and experimental validation for mechanical response of ellipsoidal particles under confined compression
  Advanced Powder Technology, 29, 5, 1292-1305, 2018-05-01
  [ Confined compression test , Discrete element method , Ellipsoidal granular assembly , Experimental validation , Multiple sphere method ]

• Effects of long-term static bending deformation on a barrier thin film for flexible organic optoelectronic devices
  Coatings, 8, 4, 2018-04-01
  [ Barrier thin film , Flexible organic optoelectronic device , Static bending , Water vapor transmission rate ]

• Effects of cyclic deformation on a barrier thin film for flexible organic optoelectronic devices
  Thin Solid Films, 650, 20-31, 2018-03-31
  [ Barrier thin film , Cracking , Cyclic bending , Delamination , Water vapor transmission rate ]

• Modelling micro-crack initiation and propagation of crystal structures with microscopic defects under uni-axial tension by discrete element method
  Powder Technology, 315, 445-476, 2017-06-15
  [ Contact-bond , Crack initiation and propagation , Crack path , Crystal structure , DEM , Inclined notched plate ]

• Mass production of LiAl alloys by the step-controlled casting process
  Materials and Design, 99, 102-106, 2016-06-05
  [ Complex hydrides , Hydrogen storage materials , Lithium aluminum alloy , Lithium-aluminum hydride , Step-controlled casting process (SCCP) , Temperature-Program Decomposition (TPD) ]

• Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression-Part II: Multi-scale exploration of internal physical properties
  Chemical Engineering Science, 144, 421-443, 2016-04-22
  [ Confined compression , DEM , Granular assembly , Internal property , Multi-scale analysis , Ring measurement cell ]

• Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression - Part I: Joint DEM-FEM modelling and experimental validation
  Chemical Engineering Science, 144, 404-420, 2016-04-22
  [ Compression characteristics , Confined compression test , Experimental validation , Granular assembly , Joint DEM-FEM approach ]

• Effects of cyclic deformation on conductive characteristics of indium tin oxide thin film on polyethylene terephthalate substrate
  Surface and Coatings Technology, 283, 298-310, 2015-12-15
  [ Annealing treatment , Cyclic-static bending , Electrical resistance , Indium tin oxide , Interfacial-buckling delamination , Polyethylene terephthalate ]

• Joint strength of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect in a reducing environment
  Journal of Power Sources, 280, 272-288, 2015-04-15
  [ Glass-ceramic sealant , Joint strength , Metallic interconnect , Planar solid oxide fuel cell , Reducing environment , Thermal aging ]

• Interfacial fracture resistance of the joint of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect
  Journal of Power Sources, 261, 227-237, 2014-09-01
  [ Glass-ceramic sealant , Interfacial fracture energy , Metallic interconnect , Planar solid oxide fuel cell , Thermal aging ]

• Creep rupture of the joint of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect
  Journal of Power Sources, 245, 787-795, 2014-01-01
  [ Creep , Glass-ceramic sealant , Joint strength , Metallic interconnect , Planar solid oxide fuel cell ]

• Analysis of structural deformation and deformation-induced solar radiation misalignment in a tracking photovoltaic system
  Renewable Energy, 59, 65-74, 2013-11-01
  [ Misalignment of solar radiation , Photovoltaic system , Solar tracker , Structural deformation , Wind load ]

• Aging effects on high-temperature creep properties of a solid oxide fuel cell glass-ceramic sealant
  Journal of Power Sources, 241, 12-19, 2013-05-27
  [ Creep property , Glass-ceramic sealant , High temperature , Ring-on-ring test , Solid oxide fuel cell ]

• Thermo-mechanical fatigue properties of a ferritic stainless steel for solid oxide fuel cell interconnect
  Journal of Power Sources, 219, 112-119, 2012-12-01
  [ Creep-fatigue interaction , Ferritic stainless steel , Interconnect , Planar solid oxide fuel cell , Thermo-mechanical fatigue ]

• Effects of cyclic hydriding-dehydriding reactions of LaNi 5 on the thin-wall deformation of metal hydride storage vessels with various configurations
  Renewable Energy, 48, 404-410, 2012-12-01
  [ Cyclic hydriding-dehydriding reactions , LaNi alloy 5 , Metal hydride storage vessel , Pulverization , Thin-wall deformation ]

• Effect of the spinning deformation processing on mechanical properties of Al-7Si-0.3Mg alloys
  Journal of Materials Engineering and Performance, 21, 9, 1873-1878, 2012-09-01
  [ Aluminum , Elongation , Spinning ]

• Joint strength of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect
  Journal of Power Sources, 205, 307-317, 2012-05-01
  [ Glass-ceramic sealant , Joint strength , Metallic interconnect , Planar solid oxide fuel cell , Pre-oxidation treatment , Thermal aging ]

• Effects of Nb and W additions on high-temperature creep properties of ferritic stainless steels for solid oxide fuel cell interconnect
  Journal of Power Sources, 198, 149-157, 2012-01-15
  [ Creep properties , Ferritic stainless steel , Interconnect , Laves phase , Planar solid oxide fuel cell , Precipitate strengthening ]

• Influence of Mg3AlNi2 content on the cycling stability of Mg2Ni-Mg3AlNi2 hydrogen storage alloy electrodes
  Intermetallics, 19, 12, 1953-1958, 2011-12-01
  [ A. Hydrogen storage , C. Composites , D. Melting , E. Surface properties ]

• Effects of cyclic hydriding-dehydriding reactions of Mg2Ni alloy on the expansion deformation of a metal hydride storage vessel
  Journal of Alloys and Compounds, 509, 25, 7162-7167, 2011-06-23
  [ Expansion deformation , Hydriding-dehydriding reaction , Metal hydride storage vessel , Mg Ni 2 ]

• Dynamic strain aging in low cycle fatigue of duplex titanium alloys
  Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 528, 13-14, 4381-4389, 2011-05-25
  [ Dynamic strain aging , Low cycle fatigue , Titanium alloys ]

• High-temperature mechanical properties of a solid oxide fuel cell glass sealant in sintered forms
  Journal of Power Sources, 196, 7, 3583-3591, 2011-04-01
  [ High temperature , Mechanical properties , Planar solid oxide fuel cell , Ring-on-ring test , Sintered glass sealant ]

• Effect of rare earth elements addition on microstructures and mechanical properties of A356 alloy
  International Journal of Cast Metals Research, 24, 2, 83-87, 2011-04-01
  [ Aluminium alloys , Mechanical properties , Metals and alloys , Microstructure , Modification , Rare earth metals ]

• Effects of Ni addition on hydrogen storage properties of Mg 17Al12 alloy
  Materials Chemistry and Physics, 126, 1-2, 319-324, 2011-03-15
  [ Absorption , Alloy , Intermetallic compounds ]

• High-temperature tensile and creep properties of a ferritic stainless steel for interconnect in solid oxide fuel cell
  Journal of Power Sources, 196, 4, 2005-2012, 2011-02-15
  [ Creep properties , Ferritic stainless steel , High temperature , Planar solid oxide fuel cell , Tensile properties ]

• Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL-7SI-0.35 Mg) aluminum alloys
  Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an, 34, 5, 609-616, 2011-01-01
  [ Mechanical properties , Metals and alloys , Microstructure ]

• Structure and hydrogen storage properties of Mg2Cu 1-xNix (x = 0-1) alloys
  International Journal of Hydrogen Energy, 35, 24, 13247-13254, 2010-12-01
  [ Hydrogen storage , Isothermal evaporation casting process , Mg Cu Ni alloys 2 1-x x ]

• Effect of spinning deformation processing on the wear and corrosion properties of Al-7Si-0.3mg alloys
  Materials and Manufacturing Processes, 25, 7, 689-695, 2010-07-01
  [ Aluminum ]

• Effects of crystallization on the high-temperature mechanical properties of a glass sealant for solid oxide fuel cell
  Journal of Power Sources, 195, 10, 3159-3165, 2010-05-15
  [ Crystallization , Glass sealant , High temperature , Mechanical properties , Planar solid oxide fuel cell ]

• Effect of Mg3MnNi2 on the electrochemical characteristics of Mg2Ni electrode alloy
  Journal of Power Sources, 195, 1, 374-379, 2010-01-01
  [ Composite hydrogen storage alloy , Electrochemical characteristics , Isothermal evaporation casting process ]

• Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys
  Journal of Alloys and Compounds, 487, 1-2, 157-162, 2009-11-13
  [ Mechanical properties , Metals and alloys , Microstructure , Rare-earth alloys and compounds ]

• Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design
  Journal of Power Sources, 192, 2, 515-524, 2009-07-15
  [ Finite element analysis , Mica-based seal , Multi-cell stack , Planar solid oxide fuel cell , Sealing design , Thermal stress ]

• High-temperature mechanical properties of a glass sealant for solid oxide fuel cell
  Journal of Power Sources, 189, 2, 1093-1099, 2009-04-15
  [ Four-point bending test , Glass transition temperature , High temperature , Mechanical properties , Planar solid oxide fuel cell , Weibull statistic analysis ]

• Effects of R-ratio on high-temperature fatigue crack growth behavior of a precipitation-hardening stainless steel
  International Journal of Fatigue, 30, 12, 2147-2155, 2008-12-01
  [ 17-4 PH stainless steel , Crack growth model , Fatigue crack growth , High-temperature , R-ratio ]

• Effects of continuously applied stress on tin whisker growth
  Microelectronics Reliability, 48, 10, 1737-1740, 2008-10-01

• Influence of frequency on the high-temperature fatigue crack growth behavior of 17-4 PH stainless steels
  Materials Transactions, 48, 3, 490-499, 2007-03-01
  [ 17-4 PH stainless steel , Fatigue crack growth , Frequency , High temperature ]

• Thermal stress analysis of a planar SOFC stack
  Journal of Power Sources, 164, 1, 238-251, 2007-01-10
  [ 3D model , Finite element analysis , Multiple-cell stack , Planar SOFC , Thermal stress ]

• Low-cycle fatigue behavior of AISI 347 stainless steel in salt water
  Journal of Materials Science, 42, 1, 40-49, 2007-01-01

• Creep properties of Sn-3.5Ag-0.5Cu lead-free solder under step-loading
  Journal of Materials Science: Materials in Electronics, 17, 8, 577-586, 2006-08-01

• Effects of strain ratio and tensile hold time on low-cycle fatigue of lead-free Sn-3.5Ag-0.5Cu solder
  Journal of Electronic Materials, 35, 2, 292-301, 2006-01-01
  [ Lead-free solder,Low-cycle fatigue,Sn-3.5Ag-0.5Cu,Strain ratio,Tensile hold time ]

• Creep rupture of lead-free Sn-3.5Ag and Sn-3.5Ag-0.5Cu solders
  Journal of Materials Science: Materials in Electronics, 16, 6, 355-365, 2005-06-01

• Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels
  Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 390, 1-2, 291-298, 2005-01-15
  [ 17-4 PH stainless steel , Dynamic strain aging , High temperatures , Low-cycle fatigue ]

• Fatigue behavior of AISI 347 stainless steel in various environments
  Journal of Materials Science, 39, 23, 6901-6908, 2004-12-01

• High-temperature fatigue crack growth behavior of 17-4 PH stainless steels
  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 35 A, 9, 3018-3024, 2004-01-01

• Corrosion fatigue of austempered ductile iron
  Journal of Materials Science, 38, 8, 1667-1672, 2003-04-15

• Influence of high temperature exposure on the mechanical behavior and microstructure of 17-4 PH stainless steel
  Journal of Materials Science, 38, 5, 965-971, 2003-03-01

• Influence of frequency on high-temperature fatigue behavior of 17-4 PH stainless steels
  Materials Transactions, 44, 4, 713-721, 2003-01-01
  [ 17-4 PH stainless steel , Creep , Frequency effect , High temperature , High-cycle fatigue ]

• Corrosion fatigue of precipitation-hardening martensitic stainless steel
  Corrosion, 58, 11, 904-911, 2002-01-01
  [ Corrosion fatigue , pH , Precipitation-hardening martensitic stainless steel , Sodium chloride , Temperature ]

• Tensile and fatigue properties of 17-4 PH stainless steel at high temperatures
  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 33, 6, 1715-1724, 2002-01-01

• Influence of heat treatment on fatigue crack growth of austempered ductile iron
  Journal of Materials Science, 37, 4, 709-716, 2002-01-01

• Environmental effects on fatigue crack growth in austempered ductile irons
  Materials Transactions, 42, 6, 1085-1094, 2001-01-01
  [ Austempered ductile iron , Austempering treatment , Corrosion fatigue crack growth , Frequency effect , Temperature effect ]

• Effects of load ratio and frequency on the fatigue behavior of 7050 aluminum alloys in salt water
  Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 21, 6, 617-627, 2000-12-01

• Corrosion fatigue behaviour of a 15Cr-6Ni precipitation-hardening stainless steel in different tempers
  Fatigue and Fracture of Engineering Materials and Structures, 23, 6, 489-497, 2000-12-01

• Mean stress effects on low-cycle fatigue for a precipitation-hardening martensitic stainless steel in different tempers
  Fatigue and Fracture of Engineering Materials and Structures, 23, 7, 545-553, 2000-07-01

• Low-cycle fatigue of austempered ductile irons at various strain ratios
  International Journal of Fatigue, 21, 1, 45-54, 1999-01-01
  [ Austempered ductile iron , Lifetime prediction , Low-cycle fatigue , Mean stress effects , Strain ratio ]

• Corrosion fatigue behavior of 7050 aluminum alloys in different tempers
  Engineering Fracture Mechanics, 59, 6, 779-795, 1998-04-06

• Effects of highly stressed volume on fatigue strength of austempered ductile irons
  International Journal of Fatigue, 20, 4, 301-307, 1998-01-01
  [ Austempered ductile iron , Fatigue strength , Highly stressed volume , Loading mode , Notch effect ]

• Effect of specimen size on thermal shock properties of an alumina
  Key Engineering Materials, 132-136, 599-602, 1997-01-01
  [ Alumina , Size effect , Thermal shock ]

• Low-Cycle fatigue of austempered ductile irons in various-Sized Y-Block castings
  materials transactions, jim, 38, 8, 692-700, 1997-01-01
  [ Austempered ductile iron , Cast section size , Fatigue crack propagation , Graphite nodule morphology , Low-cycle fatigue , Microshrinkage pores ]

• High-cycle fatigue of austempered ductile irons in various-sized Y-block castings
  materials transactions, jim, 38, 8, 682-691, 1997-01-01
  [ Austempered ductile iron , Cast section size , Graphite nodule morphology , High-cycle fatigue , Impact toughness , Microshrinkage pores ]

• Statistical analysis of size effects on time-dependent fracture of an alumina
  Journal of the Ceramic Society of Japan, 105, 9, 723-730, 1997-01-01
  [ Alumina , Size effect , Statistical analysis , Subcritical crack growth , Time-dependent fracture ]

• Size effect on thermal shock behavior of an alumina
  Journal of the Ceramic Society of Japan, 105, 12, 1062-1066, 1997-01-01
  [ Alumina , Fracture strength , Size effect , Thermal shock ]

• Statistical analysis of stress-life relationships for ceramics under static and cyclic loading
  Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 17, 2, 133-143, 1996-04-01

• Effect of cyclic loading on the creep performance of silicon nitride
  Journal of Engineering for Gas Turbines and Power, 118, 2, 251-256, 1996-01-01

• Influence of microstructure on the fatigue properties of austempered ductile irons - I. High-cycle fatigue
  International Journal of Fatigue, 18, 5, 297-307, 1996-01-01
  [ Austempered ductile irons , High-cycle fatigue , Rotary bending ]

• Influence of microstructure on the fatigue properties of austempered ductile irons - II. Low-cycle fatigue
  International Journal of Fatigue, 18, 5, 309-320, 1996-01-01
  [ Austempered ductile irons , Low-cycle fatigue , Strain-control ]

• Cyclic fatigue of hot isostatically pressed silicon nitride at elevated temperatures
  Journal of Materials Science, 29, 13, 3517-3526, 1994-01-01

• Beneficial effects of cyclic tensile loading on the fatigue resistance of an Si3N4
  Journal of Materials Science Letters, 12, 24, 1940-1944, 1993-12-01

• Apparent Enhanced Fatigue Resistance under Cyclic Tensile Loading for a HIPed Silicon Nitride
  Journal of the American Ceramic Society, 76, 3, 788-792, 1993-01-01

• Tensile dynamic and static fatigue relations for a HIPed silicon nitride at elevated temperatures
  Journal of the European Ceramic Society, 12, 1, 3-13, 1993-01-01

• Static and Cyclic Fatigue of Alumina at High Temperatures: II, Failure Analysis
  Journal of the American Ceramic Society, 75, 3, 637-648, 1992-01-01
  [ alumina , crack growth , fatigue , glass , high temperature ]

• Static and Cyclic Fatigue of Alumina at High Temperatures
  Journal of the American Ceramic Society, 74, 7, 1511-1518, 1991-01-01
  [ alumina,fatigue,high temperature,phase boundary,tension ]

研討會著作

• 鋁合金板材熱處理殘留應力消除模擬分析
  2025-12-05
  [ Aluminum alloy plates, Residual stress relief, Clamping effect ]

• Thermal Aging Effect on the Creep Strength of a Joint of Braze Sealant with Metallic Interconnect in SOFC
  2025-07-13
  [ 固態氧化物燃料電池、硬銲接合件、熱時效、潛變 ]

• Application of Artificial Intelligence on Detecting Glass Defects
  2024-11-16
  [ 人工智慧、瑕疵檢測 ]

• Thermal and Mechanical Analysis of Three-Point Welding in Air-Conditioning Rotary Compressor
  2024-09-11
  [ 空調壓縮機、銲接、有限元素法 ]

• Deep Neural Network Based Prediction of Machined Quality in Electrochemical Discharge Drilling of Sapphire Wafer
  2024-09-11
  [ 電化學放電加工、藍寶石 ]

• Creep Rupture of the Joint of an SOFC Braze Seal with Metallic Interconnect
  2024-07-02
  [ Solid Oxide Fuel Cell, Seal, Creep ]

• Mechanical Analysis of Interference Fitting in an Air-Conditioning Compressor
  2024-04-03
  [ Interference Fitting, Stress, Deformation ]

• Fatigue Analysis of Monopile Foundation for Offshore Wind Turbine
  11-17, 2024-01-01
  [ fatigue damage,monopile foundation,Offshore wind turbine,sequential approach ]

• Development and Implementation of Robot Technology for High-Precision Positioning
  151-156, 2024-01-01
  [ human-robot collaboration,precision positioning,robots ]

• 固態氧化物燃料電池硬銲接合件熱循環–潛變交互作用研究
  2023-12-01
  [ 固態氧化物燃料電池、硬銲接合件、熱循環、潛變 ]

• 基於ROS2之5G智慧工廠AMR系統開發
  2023-12-01
  [ 5G、智慧工廠、自走車 ]

• UV nanosecond laser optical breakdown and filamentation in bulk water
  2023-10-27
  

• An Artificial Intelligence Based Defect Detection System for Transparent Substrate
  2023-08-03
  [ Artificial Intelligence, Defect Detection, Glass Substrate ]

• Thermal and Mechanical Analysis for Laser Bending of Thin Brittle Substrate
  2023-04-21
  [ Laser Processing, Glass Substrate, Finite Element Analysis ]

• 固態氧化物燃料電池金屬連接板與硬銲接合件熱機疲勞性質
  2022-12-02
  [ 固態氧化物燃料電池、硬銲接合件、熱機疲勞 ]

• New-type Evaluation Method for Solidification Cracking Susceptibility
  2022-11-11
  [ Laser Processing, Cracking ]

• Artificial Intelligence-Based Modeling of Kerf Width and Machining Time in Cutting n-type SiC Wafer by Wire Electrical Discharge Machining
  2022-11-11
  [ Artificial Intelligence, Wire Electrical Discharge Machining, SiC Wafer ]

• Fracture Toughness of Selective Laser Melted and Conventionally Fabricated Martensitic Stainless Steel
  2022-11-11
  [ Selective Laser Melting, Fracture, Steel ]

• Modified Smith Predictor with a Self-tuning PID-type Fuzzy Logic Controller for Linear Systems with Small Time Delays
  2022-11-11
  [ Fuzzy Logic Control, Smith Predictor ]

• Effects of Thermal Aging on the Joint Strength of an SOFC Braze seal with Metallic Interconnect
  2022-07-05
  [ Solid Oxide Fuel Cell, Seal, Joint Strength ]

• 固態氧化物燃料電池金屬連接板與硬銲接合件潛變性質
  2021-12-03
  [ 固態氧化物燃料電池、硬銲接合件、潛變 ]

• 雷射玻璃加工製程之熱傳分析
  2021-12-03
  [ 雷射加工、玻璃、熱傳 ]

• Joint Strength of a Braze Sealant with Metallic Interconnect in Solid Oxide Fuel Cell
  1997-2005, 2021-01-01
  

• 離岸風力機單樁基座疲勞分析
  2020-11-26
  [ 風力機、機座、疲勞 ]

• 雷射光斑尺寸對雷射積層製造AISI 420不銹鋼工件機械性質之影響
  2020-11-20
  [ 雷射、積層製造、不銹鋼 ]

• 固態氧化物燃料電池金屬連接板與硬焊接合件機械性質
  2020-11-20
  [ 固態氧化物燃料電池、硬銲接合件、機械性質 ]

• Design and Analysis of Wafer Carrier for MOCVD Process
  2020-02-03
  [ MOCVD, Wafer Carrier ]

• Thermo-mechanical fatigue of SOFC glass-ceramic sealant/steel interconnect joint in a reducing atmosphere
  2323-2329, 2019-01-01
  

• Thermal and mechanical analysis of butt welding
  2019-01-01
  

• Combined cyclic-static bending effect on the encapsulation properties of a barrier thin film for flexible organic optoelectronic devices
  140-145, 2019-01-01
  [ Barrier thin film , Cyclic-static bending , Water vapor transmission rate ]

• Thermal aging effect on the joint strength between an SOFC glass-ceramic sealant and LSM-coated metallic interconnect
  1721-1729, 2017-05-30
  

• Simulation of interfacial cracking of the joint between glass-ceramic sealant and metallic interconnect in a planar solid oxide fuel cell stack
  2981-2990, 2015-01-01
  

• Effects of particle stiffness on mechanical response of granular solid under confined compression
  143-152, 2014-01-01
  [ Comfined compression , Granular material , Mechanical response , Particle stiffness ]

• Analysis of structural deformation and concentrator misalignment in a roll-tilt solar tracker
  210-213, 2013-01-01
  [ High concentrator photovoltaic , Misalignment , Solar tracker , Structural deformation ]

• Simulation of cracking of electrode assembly in planar solid oxide fuel cell
  2597-2606, 2013-01-01
  

• Analysis of structural deformation-induced sun tracking error in a 5-kW high concentrator photovoltaic system
  687-694, 2011-12-01
  

• Analysis of joint strength between a metallic interconnect and glass-ceramic sealant for use in solid oxide fuel cells
  2527-2536, 2011-12-01
  

• High-temperature stress-rupture properties of a ferritic steel for solid oxide fuel cell interconnect
  2581-2590, 2011-12-01
  

• Simulation of deformation induced sun tracking error in a high concentrated photovoltaic system
  149-152, 2010-11-29
  [ High concentrated photovoltaic system , Solar tracker , Structural deformation , Sun tracking misalignment ]

• Wind load analysis of a solar tracker for concentrator photovoltaics
  145-148, 2010-11-29
  [ Computational fluid dynamics , Concentrator photovoltaics , Wind load analysis ]

• Effects of clamping load on the thermal stress distribution in a planar SOFC with compressive sealing
  349-358, 2009-12-01
  

• High temperature mechanical properties of a crystallized BaO-B 2O3-Al2O3-SiO2 glass ceramic for SOFC
  745-750, 2009-12-01
  

• High-temperature fatigue crack growth behavior of 17-4 PH stainless steels at various load ratios
  201-210, 2009-12-01
  

• Finite element analysis of thermal stress distribution in planar SOFC
  1977-1986, 2007-12-01
  

• Creep rupture of a lead-free sn-ag-cu solder
  469-470, 2006-01-01
  

• High-temperature fatigue crack growth behavior of 17-4 PH stainless steels
  2581-2586, 2005-12-01
  

• Environmental effects on the fatigue behavior of an austenitic stainless steel
  2658-2663, 2005-12-01
  

• Corrosion fatigue behavior of 17-4 PH stainless steel in different tempers
  598-613, 2002-01-01
  [ 17-4 PH stainless steel , Corrosion fatigue , Frequency effect , Load ratio effect ]

• Effect of cyclic loading on the creep performance of silicon nitride
  1995-01-01
  

• Effect of cyclic loading on the creep performance of silicon nitride
  1995-01-01
  

• Evaluation of tensile static, dynamic, and cyclic fatigue behavior for a HIPed silicon nitride at elevated temperatures
  455-460, 1993-01-01
  

• Cyclic fatigue of alumina
  3-27, 1992-01-01
  

專書

• Key Engineering Materials
  7-12, 2019-01-01
  [ Finite element analysis,Laser additive manufacturing,Metal,Residual stress,Temperature gradient ]

• Key Engineering Materials
  257-262, 2017-01-01
  [ Mocvd,Stress analysis,Substrate holder module,Thin film ]

• Key Engineering Materials
  484-489, 2015-01-01
  [ PEN,Planar solid oxide fuel cells,Principal direction,Thermal cycling ]

• Key Engineering Materials
  520-525, 2015-01-01
  [ Confined compression,Discrete element method,Finite element method,Granular assembly,Granular solid-structure interaction,Wall pressure ]

• Applied Mechanics and Materials
  331-336, 2014-01-28
  [ PEN,Principal direction,Thermal stress intensity factor ]

• Applied Mechanics and Materials
  361-366, 2014-01-28
  [ Natural frequency,Photovoltaic system,Solar tracker,Structural deformation ]

• Key Engineering Materials
  995-998, 2007-01-01
  [ 347 stainless steel,Corrosion fatigue,Notch effect ]