國立中央大學教師履歷平台

教師個人簡歷

中文姓名

鍾禎元

英文姓名

Chung, Chen-Yuan

電子郵件

Poroelasticity CAE二次開發肌骨生物力學射出成型 injection molding Cartilage Gradient-based algorithm Stress relaxation Microstructure metal injection molding 大數據反應曲面法基因演算法壓力-比容-溫度關係類神經網路 Musculoskeletal biomechanics CAE secondary development

現職	國立中央大學工學院機械工程學系副教授
專長	肌骨生物力學 CAE二次開發射出成型 Musculoskeletal biomechanics CAE secondary development injection molding
專長簡述	肌骨生物力學、CAE二次開發、射出成型
最高學歷	美國Case Western Reserve University 機械工程(學)系博士
相關連結	個人網頁 Research Gate GRB資訊系統

科技部學門領域	E - 工程及應用科學 E01 - 機械固力 E0107 - 加工與製造 E20 - 高分子與纖維 E2005 - 高分子加工 E98 - 專案計畫 E9818 - 積層製造跨領域專案計畫
政府GRB研究專長領域	2 - 工 21 - 機構工程 2101 - 機械工程
教育部學門領域	5 - 工程、製造及營造 52 - 工程學門 5202 - 機械工程學類

捐(受)贈收入

粉末冶金結合鍛造的高強度/高韌性合金鋼開發
1131108~1161031
[粉末冶金,鍛造 , powder metallurgy,forging]
開發生產高強度鑄鋼件-子計畫1
1111201~1141130
鋁合金與熱塑型塑膠(含纖維)結合的基礎研究
1101215~1131114

國科會計畫統計

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造
1131101~1141031
熱塑性高分子之PVT大數據驅動人工智慧在射出成型製程最佳化的應用
1120601~1130531
[壓力-比容-溫度關係,大數據,反應曲面法,類神經網路,基因演算法 , PVT (pressure-specific volume-temperature) relationship,big data,response surface methodology,artificial neural network,genetic algorithm]
超硬合金粉末射出成型製程參數對於樞紐零件機械性質之影響
1090801~1110430
[金屬粉末射出成型,喂料備製,催化脫脂,燒結溫度,CAE分析模擬,粉膠分離 , metal injection molding,feedstock preparation,catalytic debinding,sintering temperature,computer aided engineering analysis,powder-binder separation]
超硬合金粉末射出成型製程參數對於樞紐零件機械性質之影響
1080801~1090731
[金屬粉末射出成型,喂料備製,催化脫脂,燒結溫度,CAE分析模擬,粉膠分離 , metal injection molding,feedstock preparation,catalytic debinding,sintering temperature,computer aided engineering analysis,powder-binder separation]
應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究
1060801~1070731
應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究
1050801~1060731
應用微射出成型於異型水路模具製作精密光學鏡片
1041001~1050930

產學合作計畫統計

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造
1131101~1141031
[節能減碳,綠色製造,微粒子珠擊,滲氮熱處理 , energy saving and carbon reduction,green manufacturing,micro shot peening,nitriding heat treatment]
熱塑性高分子之PVT大數據驅動人工智慧在射出成型製程最佳化的應用
1120601~1130531
[壓力-比容-溫度關係、大數據、反應曲面法、類神經網路、基因演算法 , PVT (pressure-specific volume-temperature) relationship,big data,response surface methodology,artificial neural network,genetic algorithm]
Hinge零件材料測試與破壞分析驗證
1101001~1110630
[樞紐,破壞 , hinge,fracture]
MIM-4605羰基鐵粉喂料之黏結劑濃度與澆口設計研究
1070501~1071031

期刊著作

Metal additive manufacturing of conformal cooling channels for improving the quality of metal injection–molded products
Advances in Mechanical Engineering, 16, 10, 2024-10-01
[ 3D printing,finite element analysis,injection molding,manufacturing processes,tool design ]
Using a poroelastodynamic model to investigate the dynamic behaviour of articular cartilage
Computer Methods and Programs in Biomedicine, 233, 2023-05-01
[ Cartilage,Mandel's problem,Poroelasticity,Poroelastodynamic ]
Effects of Tempering Temperature on the Microstructure and Mechanical Properties of MIM-4605 High-Strength Low-Alloy Steel
JOM, 74, 12, 4736-4745, 2022-12-01
Hot deformation behavior and processing map of AZ61/SiC composites
Materials Today Communications, 29, 2021-12-01
[ AZ61/SiC composites,flow behavior,hot deformation,processing map ]
Effects of injection molding process parameters on the chemical foaming behavior of polypropylene and polystyrene
Polymers, 13, 14, 2021-07-02
[ Amorphous material,Exothermic chemical foaming agent,Foam injection molding,Semi-crystalline material ]
Integrated optimum layout of conformal cooling channels and optimal injection molding process parameters for optical lenses
Applied Sciences (Switzerland), 9, 20, 2019-10-01
[ Birefringence , Design of experiments , Fringe pattern , Gradient-based algorithm , Robust genetic algorithm , Warpage ]
Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel
Materials Letters, 237, 228-231, 2019-02-15
[ Metal injection molding , Metals and alloys , Microstructure , Nanosize , Particles ]
Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys
Materials Letters, 228, 270-272, 2018-10-01
[ Al-4.5Zn-1.6Mg alloy , Microstructure , Recrystallization , Sc , Zr ]
A micro constitutive model for ultra-high molecular weight polyethylene orthopaedic implant bearings
Defect and Diffusion Forum, 382 DDF, 201-207, 2018-01-01
[ Constitutive behavior,Micromechanics,Ultra-high molecular weight polyethylene ]
A simplified application (APP) for the parametric design of screw-plate fixation of bone fractures
Journal of the Mechanical Behavior of Biomedical Materials, 77, 642-648, 2018-01-01
[ Analytical approach , Application (APP) , Interfragmentary strain , Stress shielding ]
Ultrasound Elastography for Estimation of Regional Strain of Multilayered Hydrogels and Tissue-Engineered Cartilage
Annals of Biomedical Engineering, 43, 12, 2991-3003, 2015-06-16
[ Acoustic methods , Bioreactor , Depth-dependent deformation , Mechanical properties , Multimodal evaluation ]
Determination of poroelastic properties of cartilage using constrained optimization coupled with finite element analysis
Journal of the Mechanical Behavior of Biomedical Materials, 42, 10-18, 2015-02-01
[ Constrained optimization , Gradient-based algorithm , Poroelasticity , Zero-order method ]
Application of ANSYS to the stress relaxation of articular cartilage in unconfined compression
Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an, 37, 3, 376-384, 2014-04-03
[ ANSYS , cartilage , poroelasticity , stress relaxation ]
Towards the Feasibility of Using Ultrasound to Determine Mechanical Properties of Tissues in a Bioreactor
Annals of Biomedical Engineering, 42, 10, 2014-01-01
[ Aggregate modulus , Hydrogel , Poroelastic wave propagation , Quality control , Tissue engineering ]
Vibration analysis of the flexible connecting rod with the breathing crack in a slider-crank mechanism
Journal of Vibration and Acoustics, Transactions of the ASME, 135, 6, 2013-12-01
[ Breathing crack , Flexible connecting rod , Slider-crank mechanism ]
Using regression models to determine the poroelastic properties of cartilage
Journal of Biomechanics, 46, 11, 1921-1927, 2013-07-26
[ Linear regression , Poroelasticity , Stress relaxation , Transversely isotropic ]
Advanced ultrasonic technology for air void distribution in concrete
Materials Evaluation, 71, 3, 359-368, 2013-03-01
[ Heterogeneous materials , Pore size distribution , Ultrasonic testing , Wave scattering ]

研討會著作

OPTIMIZATION OF INJECTION-MOLDING PARAMETERS FOR THE WARPAGE OF GREEN PARTS OF METAL INJECTION MOLDING BY THE TAGUCHI METHOD
2021-01-01
[ Metal injection molding,Powder-binder separation,Warpage,Weld line ]
Injection Molding Study on the Strength of Weld Line for Polycarbonate and Carbon Fiber Composite Material
2020-06-15
The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding
2019-02-06
[ conductive polymer composite material , magnetic-assisted injection molding , through-plane conductivity ]
Pre-surgical planning of screw-position arrangement for the femur fractures with a custom app
2018-01-01
A continuous shear deflection function for articular cartilage
713-714, 2012-12-01
Stress relaxation of cartilage under simple shear and compression: Experiments and finite element analyses
711-712, 2012-12-01

專書

Nano Hybrids and Composites
2024-02-15
[ microcellular injection molding,gas counter pressure control,multi-walled carbon nanotube ]
Key Engineering Materials
114-122, 2019-01-01
[ Conductive polymer composite material,Conductivity,Fiber orientation,Magnetic-assisted injection molding ]
Materials Science Forum
126-135, 2018-01-01
[ Conductive polymer composite material,Magnetic-assisted injection molding,Multiphysics ]
Materials Science Forum
136-141, 2018-01-01
[ Conductive polymer composite material,Magnetic-assisted injection molding,Through-plane conductivity ]
Key Engineering Materials
234-240, 2017-01-01
[ Biomimetic,Nano-reinforced composites,Stress diffusion ]

捐(受)贈收入

粉末冶金結合鍛造的高強度/高韌性合金鋼開發 1131108~1161031 [粉末冶金,鍛造 , powder metallurgy,forging]

開發生產高強度鑄鋼件-子計畫1 1111201~1141130

鋁合金與熱塑型塑膠(含纖維)結合的基礎研究 1101215~1131114

國科會計畫統計

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造 1131101~1141031

應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究 1060801~1070731

應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究 1050801~1060731

應用微射出成型於異型水路模具製作精密光學鏡片 1041001~1050930

產學合作計畫統計

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造 1131101~1141031 [節能減碳,綠色製造,微粒子珠擊,滲氮熱處理 , energy saving and carbon reduction,green manufacturing,micro shot peening,nitriding heat treatment]

Hinge零件材料測試與破壞分析驗證 1101001~1110630 [樞紐,破壞 , hinge,fracture]

MIM-4605羰基鐵粉喂料之黏結劑濃度與澆口設計研究 1070501~1071031

期刊著作

Metal additive manufacturing of conformal cooling channels for improving the quality of metal injection–molded products Advances in Mechanical Engineering, 16, 10, 2024-10-01 [ 3D printing,finite element analysis,injection molding,manufacturing processes,tool design ]

Using a poroelastodynamic model to investigate the dynamic behaviour of articular cartilage Computer Methods and Programs in Biomedicine, 233, 2023-05-01 [ Cartilage,Mandel's problem,Poroelasticity,Poroelastodynamic ]

Effects of Tempering Temperature on the Microstructure and Mechanical Properties of MIM-4605 High-Strength Low-Alloy Steel JOM, 74, 12, 4736-4745, 2022-12-01

Hot deformation behavior and processing map of AZ61/SiC composites Materials Today Communications, 29, 2021-12-01 [ AZ61/SiC composites,flow behavior,hot deformation,processing map ]

Effects of injection molding process parameters on the chemical foaming behavior of polypropylene and polystyrene Polymers, 13, 14, 2021-07-02 [ Amorphous material,Exothermic chemical foaming agent,Foam injection molding,Semi-crystalline material ]

Integrated optimum layout of conformal cooling channels and optimal injection molding process parameters for optical lenses Applied Sciences (Switzerland), 9, 20, 2019-10-01 [ Birefringence , Design of experiments , Fringe pattern , Gradient-based algorithm , Robust genetic algorithm , Warpage ]

Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel Materials Letters, 237, 228-231, 2019-02-15 [ Metal injection molding , Metals and alloys , Microstructure , Nanosize , Particles ]

Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys Materials Letters, 228, 270-272, 2018-10-01 [ Al-4.5Zn-1.6Mg alloy , Microstructure , Recrystallization , Sc , Zr ]

A micro constitutive model for ultra-high molecular weight polyethylene orthopaedic implant bearings Defect and Diffusion Forum, 382 DDF, 201-207, 2018-01-01 [ Constitutive behavior,Micromechanics,Ultra-high molecular weight polyethylene ]

A simplified application (APP) for the parametric design of screw-plate fixation of bone fractures Journal of the Mechanical Behavior of Biomedical Materials, 77, 642-648, 2018-01-01 [ Analytical approach , Application (APP) , Interfragmentary strain , Stress shielding ]

Ultrasound Elastography for Estimation of Regional Strain of Multilayered Hydrogels and Tissue-Engineered Cartilage Annals of Biomedical Engineering, 43, 12, 2991-3003, 2015-06-16 [ Acoustic methods , Bioreactor , Depth-dependent deformation , Mechanical properties , Multimodal evaluation ]

Determination of poroelastic properties of cartilage using constrained optimization coupled with finite element analysis Journal of the Mechanical Behavior of Biomedical Materials, 42, 10-18, 2015-02-01 [ Constrained optimization , Gradient-based algorithm , Poroelasticity , Zero-order method ]

Towards the Feasibility of Using Ultrasound to Determine Mechanical Properties of Tissues in a Bioreactor Annals of Biomedical Engineering, 42, 10, 2014-01-01 [ Aggregate modulus , Hydrogel , Poroelastic wave propagation , Quality control , Tissue engineering ]

Vibration analysis of the flexible connecting rod with the breathing crack in a slider-crank mechanism Journal of Vibration and Acoustics, Transactions of the ASME, 135, 6, 2013-12-01 [ Breathing crack , Flexible connecting rod , Slider-crank mechanism ]

Using regression models to determine the poroelastic properties of cartilage Journal of Biomechanics, 46, 11, 1921-1927, 2013-07-26 [ Linear regression , Poroelasticity , Stress relaxation , Transversely isotropic ]

Advanced ultrasonic technology for air void distribution in concrete Materials Evaluation, 71, 3, 359-368, 2013-03-01 [ Heterogeneous materials , Pore size distribution , Ultrasonic testing , Wave scattering ]

研討會著作

OPTIMIZATION OF INJECTION-MOLDING PARAMETERS FOR THE WARPAGE OF GREEN PARTS OF METAL INJECTION MOLDING BY THE TAGUCHI METHOD 2021-01-01 [ Metal injection molding,Powder-binder separation,Warpage,Weld line ]

Injection Molding Study on the Strength of Weld Line for Polycarbonate and Carbon Fiber Composite Material 2020-06-15

The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding 2019-02-06 [ conductive polymer composite material , magnetic-assisted injection molding , through-plane conductivity ]

Pre-surgical planning of screw-position arrangement for the femur fractures with a custom app 2018-01-01

A continuous shear deflection function for articular cartilage 713-714, 2012-12-01

Stress relaxation of cartilage under simple shear and compression: Experiments and finite element analyses 711-712, 2012-12-01

專書

Nano Hybrids and Composites 2024-02-15 [ microcellular injection molding,gas counter pressure control,multi-walled carbon nanotube ]

Key Engineering Materials 114-122, 2019-01-01 [ Conductive polymer composite material,Conductivity,Fiber orientation,Magnetic-assisted injection molding ]

Materials Science Forum 126-135, 2018-01-01 [ Conductive polymer composite material,Magnetic-assisted injection molding,Multiphysics ]

Materials Science Forum 136-141, 2018-01-01 [ Conductive polymer composite material,Magnetic-assisted injection molding,Through-plane conductivity ]

Key Engineering Materials 234-240, 2017-01-01 [ Biomimetic,Nano-reinforced composites,Stress diffusion ]

粉末冶金結合鍛造的高強度/高韌性合金鋼開發
1131108~1161031
[粉末冶金,鍛造 , powder metallurgy,forging]

開發生產高強度鑄鋼件-子計畫1
1111201~1141130

鋁合金與熱塑型塑膠(含纖維)結合的基礎研究
1101215~1131114

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造
1131101~1141031

應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究
1060801~1070731

應用外加磁場輔助射出成型對於導電高分子複合材料之磁性纖維配向與導電度的改善研究
1050801~1060731

應用微射出成型於異型水路模具製作精密光學鏡片
1041001~1050930

應用微粒子珠擊於節能減碳的熱處理關鍵技術建置於金屬粉末射出成型之綠色製造
1131101~1141031
[節能減碳,綠色製造,微粒子珠擊,滲氮熱處理 , energy saving and carbon reduction,green manufacturing,micro shot peening,nitriding heat treatment]

Hinge零件材料測試與破壞分析驗證
1101001~1110630
[樞紐,破壞 , hinge,fracture]

MIM-4605羰基鐵粉喂料之黏結劑濃度與澆口設計研究
1070501~1071031

Metal additive manufacturing of conformal cooling channels for improving the quality of metal injection–molded products
Advances in Mechanical Engineering, 16, 10, 2024-10-01
[ 3D printing,finite element analysis,injection molding,manufacturing processes,tool design ]

Using a poroelastodynamic model to investigate the dynamic behaviour of articular cartilage
Computer Methods and Programs in Biomedicine, 233, 2023-05-01
[ Cartilage,Mandel's problem,Poroelasticity,Poroelastodynamic ]

Effects of Tempering Temperature on the Microstructure and Mechanical Properties of MIM-4605 High-Strength Low-Alloy Steel
JOM, 74, 12, 4736-4745, 2022-12-01

Hot deformation behavior and processing map of AZ61/SiC composites
Materials Today Communications, 29, 2021-12-01
[ AZ61/SiC composites,flow behavior,hot deformation,processing map ]

Effects of injection molding process parameters on the chemical foaming behavior of polypropylene and polystyrene
Polymers, 13, 14, 2021-07-02
[ Amorphous material,Exothermic chemical foaming agent,Foam injection molding,Semi-crystalline material ]

Integrated optimum layout of conformal cooling channels and optimal injection molding process parameters for optical lenses
Applied Sciences (Switzerland), 9, 20, 2019-10-01
[ Birefringence , Design of experiments , Fringe pattern , Gradient-based algorithm , Robust genetic algorithm , Warpage ]

Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel
Materials Letters, 237, 228-231, 2019-02-15
[ Metal injection molding , Metals and alloys , Microstructure , Nanosize , Particles ]

Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys
Materials Letters, 228, 270-272, 2018-10-01
[ Al-4.5Zn-1.6Mg alloy , Microstructure , Recrystallization , Sc , Zr ]

A micro constitutive model for ultra-high molecular weight polyethylene orthopaedic implant bearings
Defect and Diffusion Forum, 382 DDF, 201-207, 2018-01-01
[ Constitutive behavior,Micromechanics,Ultra-high molecular weight polyethylene ]

A simplified application (APP) for the parametric design of screw-plate fixation of bone fractures
Journal of the Mechanical Behavior of Biomedical Materials, 77, 642-648, 2018-01-01
[ Analytical approach , Application (APP) , Interfragmentary strain , Stress shielding ]

Ultrasound Elastography for Estimation of Regional Strain of Multilayered Hydrogels and Tissue-Engineered Cartilage
Annals of Biomedical Engineering, 43, 12, 2991-3003, 2015-06-16
[ Acoustic methods , Bioreactor , Depth-dependent deformation , Mechanical properties , Multimodal evaluation ]

Determination of poroelastic properties of cartilage using constrained optimization coupled with finite element analysis
Journal of the Mechanical Behavior of Biomedical Materials, 42, 10-18, 2015-02-01
[ Constrained optimization , Gradient-based algorithm , Poroelasticity , Zero-order method ]

Towards the Feasibility of Using Ultrasound to Determine Mechanical Properties of Tissues in a Bioreactor
Annals of Biomedical Engineering, 42, 10, 2014-01-01
[ Aggregate modulus , Hydrogel , Poroelastic wave propagation , Quality control , Tissue engineering ]

Vibration analysis of the flexible connecting rod with the breathing crack in a slider-crank mechanism
Journal of Vibration and Acoustics, Transactions of the ASME, 135, 6, 2013-12-01
[ Breathing crack , Flexible connecting rod , Slider-crank mechanism ]

Using regression models to determine the poroelastic properties of cartilage
Journal of Biomechanics, 46, 11, 1921-1927, 2013-07-26
[ Linear regression , Poroelasticity , Stress relaxation , Transversely isotropic ]

Advanced ultrasonic technology for air void distribution in concrete
Materials Evaluation, 71, 3, 359-368, 2013-03-01
[ Heterogeneous materials , Pore size distribution , Ultrasonic testing , Wave scattering ]

OPTIMIZATION OF INJECTION-MOLDING PARAMETERS FOR THE WARPAGE OF GREEN PARTS OF METAL INJECTION MOLDING BY THE TAGUCHI METHOD
2021-01-01
[ Metal injection molding,Powder-binder separation,Warpage,Weld line ]

Injection Molding Study on the Strength of Weld Line for Polycarbonate and Carbon Fiber Composite Material
2020-06-15

The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding
2019-02-06
[ conductive polymer composite material , magnetic-assisted injection molding , through-plane conductivity ]

Pre-surgical planning of screw-position arrangement for the femur fractures with a custom app
2018-01-01

A continuous shear deflection function for articular cartilage
713-714, 2012-12-01

Stress relaxation of cartilage under simple shear and compression: Experiments and finite element analyses
711-712, 2012-12-01

Nano Hybrids and Composites
2024-02-15
[ microcellular injection molding,gas counter pressure control,multi-walled carbon nanotube ]

Key Engineering Materials
114-122, 2019-01-01
[ Conductive polymer composite material,Conductivity,Fiber orientation,Magnetic-assisted injection molding ]

Materials Science Forum
126-135, 2018-01-01
[ Conductive polymer composite material,Magnetic-assisted injection molding,Multiphysics ]

Materials Science Forum
136-141, 2018-01-01
[ Conductive polymer composite material,Magnetic-assisted injection molding,Through-plane conductivity ]

Key Engineering Materials
234-240, 2017-01-01
[ Biomimetic,Nano-reinforced composites,Stress diffusion ]