教師個人簡歷
現職
國立中央大學
工學院機械工程學系
副教授
專長
輕金屬材料(鋁、鎂合金)
鋁基複合材料
生醫鎂合金
多孔金屬材料
金屬熱鍛加工
抗彈材料
鋁儲能材料
Light metal materials (aluminum, magnesium alloys)
Metal Matrix Composites
Biomedical magnesium
Composite Metal foam
Hot Deformation
Ballistic Resistant Materials
Energy Storage Materials
專長簡述
國防抗彈防護材料、生醫材料,先進合金材料設計與製造
最高學歷
國立中央大學
機械工程(學)系
博士
科技部學門領域
政府GRB研究專長領域
教育部學門領域
國科會計畫統計
-
原位生成TiC增強粒子/7005鋁基複合材料之力學性質與熱加工製程探討
1150801~1160731
-
開發具高溫穩定性與抗輻射強化機制之Ti微合金強化型低活化鋼材
1150101~1151231
-
原位生成TiC增強粒子/7005鋁基複合材料之力學性質與熱加工製程探討
1140801~1150731
-
Ga元素與退火處理對Al-Zn-Sn陽極合金電化學效能的影響
1140601~1150531
-
探討空心鋼球對鋁基多孔複合材料力學性能與抗衝擊之影響
1130802~1131031
[泡沫金屬,鋁合金,機械性質 , metal foam,aluminum,mechanical properties] -
解析高熵合金之高溫應力-應變行為與熱加工參數之建立(2/2)
1130801~1140731
[高溫應力應變,高溫成形,組合方程式 , High temperature stress and strain,High temperature forming,Constitutive equation] -
低活化抗輻射材料之熔煉研製—應用於磁約束高溫電漿研究反應爐結構材料
1130801~1131231
[低活化能合金鋼,顯微結構,熱處理,高溫力學性質 , Low activation energy alloy,microstructure,heat treatment,high temperature mechanical properties]
產學合作計畫統計
-
製備含銀抗菌316L不鏽鋼
1141020~1141220
[不鏽鋼 , 不鏽鋼] -
成分分析
1140919~1141031
[成分分析 , 成分分析] -
鍍銅尼龍織物化學鍍銅工藝
1140915~1141015
[化學鍍銅 , 化學鍍銅] -
委託製備先進韌性鉻鎢合金鋼(F82H)材料
1140901~1140930
[鉻鎢合金 , 鉻鎢合金] -
Ga元素與退火處理對Al-Zn-Sn陽極合金電化學效能的影響
1140601~1150531
[鋁陽極,Ga元素,退火處理,空氣電池 , Aluminum anode,Ga element,annealing treatment,air battery] -
增厚型多孔碳化矽預型體複材之研究
1140318~1141231
[複合材料,陶瓷預型體,熔體滲入,抗彎強度 , Composite Materials,Ceramic Preforms,Melt Infiltration,Bending Strength] -
再生鋁材顯微組織與其品質特性影響
1140115~1141231
[鋁合金,離心去油,再生回收 , Aluminum Alloy,Centrifugal Degreasing,recycling industry] -
新穎輕量化複合式抗爆材料與結構之開發計畫
1140101~1141231
[抗爆複合材料,高分子聚脲塗料,多孔金屬,爆炸數值模擬 , Anti-explosive composite material,Polymer polyurea coating,metal foam,Explosion numerical simulation] -
TZM粉末冶金溫間鍛造製程開發(1/3)
1140101~1141231
[鉬鈦鋯合金,粉末冶金,恆溫鍛造,高溫機械性能,熱加工圖模擬 , TZM alloy,powder metallurgy,constant temperature forging,high-temperature mechanical performance,hot working map simulation] -
探討空心鋼球對鋁基多孔複合材料力學性能與抗衝擊之影響
1121101~1131031
[泡沫金屬,鋁合金,機械性質 , metal foam,aluminum,mechanical properties]
期刊著作
-
Effects of Scandium on Microstructure and Mechanical Properties of the Nickel-Based 718Plus Superalloy
Steel Research International, 96, 11, 456-469, 2025-11-01
[ 718Plus,creep,mechanical properties,microstructure,scandium ] -
Analysis of Acoustic and Mechanical Performance of Steel Foam Structural Parameters Using Design of Experiments
Steel Research International, 96, 9, 142-155, 2025-09-01
[ compressive mechanics,design of experiments,sound absorptions,steel foams ] -
Optimization of sound absorption performance of 316L stainless steel foam using the Taguchi method
Acoustical Science and Technology, 46, 4, 295-302, 2025-07-01
[ 316L stainless steel foam,Analysis of variance,Optimization,Sound absorption,Taguchi method ] -
Impact of Sr and La modification and post-heat treatment on microstructural evolution and thermal conductivity of hypoeutectic Al-Si alloys
Journal of Alloys and Compounds, 1032, 2025-06-10
[ Al-Si alloy,Electrical conductivity,Electron back scatter diffraction,Fluidity,La,Spheroidization annealing,Sr,Thermal conductivity ] -
Effect of Homogenization and Zn/Mg Ratio on the Mechanical Properties, Stress Corrosion Cracking Resistance, and Quench Sensitivity of Al–Zn–Mg–2.5Cu (AA7095) Alloys
Advanced Engineering Materials, 27, 9, 2025-05-01
[ Al–Zn–Mg–Cu alloys,homogenization treatments,mechanical properties,quench sensitivities,stress corrosion resistances ] -
Minor tungsten addition enhances corrosive resistance in CoCrFeNi high-entropy alloy at elevated seawater temperature
Journal of Materials Research and Technology, 33, 2970-2980, 2024-11-01
[ Corrosion behavior,Electrochemical impedance spectroscopy,High entropy alloys,Passive film,Scanning electrochemical microscopy ] -
Prediction of Flow Stress and Characterizing the Deformation Mechanism of As-Extruded 7005 Aluminum Alloy
Advanced Engineering Materials, 26, 11, 2024-06-01
[ activation energy,as-extruded 7005 Al alloy,constitutive equations,flow stress,residual stress,stress exponent ] -
Evaluation of the Effects of SiCp on Hot Deformation Behavior and Microstructure of AZ61 Magnesium Alloy
Journal of Materials Engineering and Performance, 33, 4, 1919-1930, 2024-02-01
[ constitutive analysis,hot deformation,magnesium alloy,processing map,silicon carbide ] -
Enhancement of energy absorption in Mg–3Al–1Zn foam with 316L hollow spheres
MRS Communications, 13, 6, 1232-1237, 2023-12-01
[ Absorption,Cellular,Infiltration,Interface,Mg,Stress/strain relationship ] -
Microstructure evolution and Zener-Hollomon parameter analysis as-extruded 7005 aluminum alloy during hot deformation
Materials Today Communications, 37, 2023-12-01
[ As-extruded 7005 aluminum alloy,Dynamic recovery,Dynamic recrystallization,Zener-Hollomon parameter ] -
Exploring hot deformation behavior of equimolar CoCrFeNi high-entropy alloy through constitutive equations and microstructure characterization
Materials Characterization, 205, 2023-11-01
[ Constitutive equation,Hot deformation behavior,Microstructure,Processing map ] -
Dissolution of nanoprecipitate on aluminum-alloy anode for high discharging performance in Al battery applications
Journal of Alloys and Compounds, 954, 2023-09-05
[ Al anode,Bismuth dopant,Electrochemistry,Fuel cells,Nanoparticles ] -
Optimization of hot deformation processing parameters for as-extruded 7005 alloys through the integration of 3D processing maps and FEM numerical simulation
Journal of Alloys and Compounds, 948, 2023-07-05
[ 3D processing maps,As-extruded 7005 alloys,FEM numerical simulation,Flow instability(ξ),Hot deformation behavior,Power dissipation(η) ] -
Nano-Diamond-Enhanced Integrated Response of a Surface Plasmon Resonance Biosensor
Sensors, 23, 11, 2023-06-01
[ biosensor,diamond nanoparticle,extraordinary optical transmission,surface plasmon resonance ] -
The effect of the Zn content on the electrochemical performance of Al-Zn-Sn-Ga alloys
Materials Chemistry and Physics, 299, 2023-04-15
[ Al-Zn-Sn-Ga,Aluminum anode alloy,Discharge potential,Electrochemistry ] -
Effects of Tempering Temperature on the Microstructure and Mechanical Properties of MIM-4605 High-Strength Low-Alloy Steel
JOM, 74, 12, 4736-4745, 2022-12-01 -
Effects of Trace Ag and Heat Treatment on the Mechanical Properties and Corrosion Resistance of Al-Zn-Mg-Cu Alloys
JOM, 74, 10, 3877-3886, 2022-10-01 -
Corrosion Resistance and Thermal Conductivity Enhancement of Reduced Graphene Oxide–BaSO4–Epoxy Composites
Polymers, 14, 15, 2022-08-01
[ composite,corrosion resistance,epoxy,graphene,thermal conductivity ] -
Microstructure and Superelastic Properties of FeNiCoAlTi Single Crystals with the <100> Orientation under Tension
Crystals, 12, 4, 2022-04-01
[ FeNiCoAlTi,shape memory alloys,superelasticity ] -
Impact of electromagnetic stirring on the gas metal arc welding of an MAR-M247 superalloy
International Journal of Advanced Manufacturing Technology, 119, 1-2, 343-355, 2022-03-01
[ Electromagnetic stirring,Gas tungsten arc welding,MAR-M247,Superalloy ] -
Magnetic Properties of FeNiCoAlTiNb Shape Memory Alloys
Crystals, 12, 1, 2022-01-01
[ Aging heat treatment,FeNiCoAlTiNb,Magnetic property,Shape memory alloys,Transformation temperatures ] -
Hot deformation behavior and processing map of AZ61/SiC composites
Materials Today Communications, 29, 2021-12-01
[ AZ61/SiC composites,flow behavior,hot deformation,processing map ] -
Effects of the coherency of Al3Zr on the microstructures and quench sensitivity of Al–Zn–Mg–Cu alloys
Materials Today Communications, 28, 2021-09-01
[ Al-Zn-Mg-Cu alloy,Al3Zr,Coherency,Cold rolling,Quench sensitivity,Recrystallization ] -
Fabrication of 17-4PH Stainless Steel Foam by a Pressureless Powder Space Holder Technique
Advanced Engineering Materials, 23, 6, 2021-06-01
[ 17-4PH,porosity,presssureless,space holder techniques ] -
Microstructure investigation of new iron-based FeNiCoAlTiNb shape memory alloys
Results in Materials, 10, 2021-06-01
[ Aging heat treatment,FeNiCoAlTiNb,Microstructure,Shape memory alloys ] -
Nondestructive tests on the effect of Mg content on the corrosion and mechanical properties of 5000 series aluminum alloys
Materials Chemistry and Physics, 259, 2021-02-01
[ Al–Mg alloy,Conductivity,Linear regression,Mechanical properties,Nondestructive testing,Sensitization phenomenon,β phase ] -
Electropolishing of Additive Manufactured 17-4 PH Stainless Steel Using Sulfuric Acid
International Journal of Electrochemical Science, 16, 1-10, 2021-01-01
[ 17-4 PH stainless steel,Additive Manufacturing,Electropolish,Roughness ] -
The Effects of a Trace Amount of Manganese and the Homogenization on the Recrystallization of Al-7Mg-0.15Ti Alloys
Molecules, 26, 1, 2020-12-31
[ Al4Mn dispersoids,Al–Mg alloy,manganese,mechanical properties,recrystallized grains,two-stage homogenization ] -
Effect of natural aging on the stress corrosion cracking behavior of A201-T7 aluminum alloy
Materials, 13, 24, 1-10, 2020-12-02
[ Al-Cu-Mg-Ag alloy,Natural aging,PFZ,SSRT,Stress corrosion cracking ] -
Electron beam welding behavior of a 5083-H15 alloy containing Zr and Sc
Welding in the World, Le Soudage Dans Le Monde, 64, 10, 1737-1747, 2020-10-01
[ Al-Mg alloy,Al3 (Sc, Zr),Electron beam welding,Mechanical properties,Microstructure ] -
Use of Hardness and Electrical Conductivity Testing to Evaluate Heat Damage and Sensitization in 5083-H116 Al-Mg Alloys
Journal of Materials Engineering and Performance, 29, 9, 6239-6246, 2020-09-01
[ 5083-H116,electrical conductivity,hardness,heat damage,Mg2Al3,sensitization ] -
The study of corrosion behavior of manganese-based conversion coating on LZ91 magnesium alloy: Effect of addition of pyrophosphate and cerium
Materials and Design, 192, 2020-07-01
[ Chemical conversion coating,Corrosion resistance,EIS,Magnesium alloy,Microstructure,Salt spray test ] -
Effects of stabilization treatment on the precipitation behavior of β phase and stress corrosion for AA5383-H15 alloys
Journal of Materials Research, 34, 14, 2554-2562, 2019-07-28
[ Al,alloy,annealing,microstructure ] -
Study of the strengthening mechanism of electrodeposited Ni-B thin films with ultra-low boron content
Materials Letters, 238, 275-277, 2019-03-01
[ Electrodeposition,HR-TEM,Indentation and hardness,Synchrotron radiation,Thin films ] -
Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel
Materials Letters, 237, 228-231, 2019-02-15
[ Metal injection molding , Metals and alloys , Microstructure , Nanosize , Particles ] -
Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys
Materials Letters, 228, 270-272, 2018-10-01
[ Al-4.5Zn-1.6Mg alloy , Microstructure , Recrystallization , Sc , Zr ] -
Effects of CCEP and Sc on superplasticity of Al–5.6Mg–0.7Mn alloys
Materials and Manufacturing Processes, 33, 8, 867-872, 2018-06-11
[ Alloys , aluminum , extrusion , high temperature , microstructure , plastics , processes , recrystallization ] -
Effects of the addition of trace amounts of Sc on the microstructure and mechanical properties of Al-11.6Si alloys
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 723, 22-28, 2018-04-18
[ Al-11.6Si alloys,Mechanical properties,Microstructure,Scandium ] -
Effect of trace Be and Sc additions on the mechanical properties of A357 alloys
Metals, 8, 3, 2018-03-19
[ A357 alloy , Mechanical properties , Microstructure , Scandium ] -
Microstructure and Thermal Stability of A357 Alloy With and Without the Addition of Zr
Journal of Materials Engineering and Performance, 26, 11, 5511-5518, 2017-11-01
[ aluminum , heat treatment , microscopy , optical metallography ] -
The effect of trace Sc on the quench sensitivity of AL-7Si-0.6 Mg alloys
Materials Letters, 161, 340-342, 2015-12-15
[ Al<inf>3</inf>Sc , Cast , Metals and alloys , Microstructure , Scandium ] -
Effects of trace Be and Sc addition on the thermal stability of Al-7Si-0.6Mg alloys
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 614, 54-61, 2014-09-22
[ Al-7Si-0.6Mg alloys , Beryllium , Mechanical properties , Scandium , Thermal stability ] -
Effects of scandium addition on iron-bearing phases and tensile properties of Al-7Si-0.6Mg alloys
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 593, 103-110, 2014-01-21
[ Al-7Si-0.6Mg alloys , Ductility , Interdendritic shrinkage , Scandium ]
專書
-
Lecture Notes in Mechanical Engineering
191-200, 2025-01-01
[ Graded steel foam,Impedance tube,Sound absorption ] -
Materials Science Forum
202-206, 2018-01-01
[ 6061 alloys,Mechanical properties,Microstructure,Zirconium ]
校內獲獎
- 114 新聘傑出人才獎勵
- 113 新聘卓越人才獎勵
國立中央大學