自潤耐磨銅與合金鋼及高碳鋼擴散接合製程技術開發研究 1121101~1131031
[擴散接合製程技術開發研究
,
selflubricating wear-resistant copper with alloy steel]
電漿電解拋光改善異質擴散焊接技術應用於低軌衛星散熱模組 1120801~1130731
[電漿電解拋光改善異質擴散焊接技術
,
Using Plasma Electrolytic Polishing to Enhance Genuine Diffusion Bondability of Dissimilar Metals]
開發複合金屬薄膜蝕刻製程用於A世代元件製程 1111101~1121031
[A世代元件製程,電漿離子蝕刻先進製程與設備,電化學加工,複合金屬薄膜
,
Generation A device process,Plasma Reactive Ion Etching,Electrochemical Machining,composite metal films]
開發複合金屬薄膜蝕刻製程用於A世代元件製程 1111101~1121031
[A世代元件製程,電漿離子蝕刻先進製程與設備,電化學加工,複合金屬薄膜
,
Generation A device process,Plasma Reactive Ion Etching,Electrochemical Machining,composite metal films]
Influential Factors on Diffusion Bonding Strength as Demonstrated by Bonded Multi-Layered Stainless Steel 316L and 430 Stack
Materials,
17,
15,
2024-08-01
[
diffusion bonding,multi-layered,SS316L,SS430,stainless steel
]
Dimensional accuracy in quick plastic forming of aluminum alloy using demolding mechanism
Advances in Mechanical Engineering,
13,
6,
2021-01-01
[
cell phone,demolding mechanism,IT tolerance,Quick plastic forming
]
Simulation and analysis of through-mask electrochemical machining with moving tools
Advances in Mechanical Engineering,
13,
4,
2021-01-01
[
Computer assisted manufacturing,machining,manufacturing processes,manufacturing technology,numerical analysis
]
Joint strength of Ag–9Pd–9Ga brazed interconnect and anode-supported electrolyte for solid-oxide fuel cell applications
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
232,
9,
749-760,
2018-09-01
[
glass-ceramic , interconnect , joint strength , silver–palladium–gallium , Solid-oxide fuel cells
]
Gas forming of shallow rounded rectangular pan using aluminum alloy sheets
International Journal of Advanced Manufacturing Technology,
97,
5-8,
2469-2475,
2018-07-01
[
Aluminum-alloy forming , Die-entrance contour , Gas forming , Hydroforming , Shallow rounded rectangular pan , Smartphone case , Stress concentration
]
Micro-pillars enhanced all vanadium redox flow batteries and the effect of assembly torque on the electrochemical performance
Microsystem Technologies,
23,
6,
2065-2074,
2017-06-01
Ge/IIIV fin field-effect transistor common gate process and numerical simulations
Journal of Micro/ Nanolithography, MEMS, and MOEMS,
16,
2,
2017-04-01
[
atomic layer deposition,computational fluid dynamics,numerical simulation,transistors
]
PCM based heat sinks of paraffin/nanoplatelet graphite composite for thermal management of IGBT
Applied Thermal Engineering,
112,
1129-1136,
2017-02-05
[
Differential scanning calorimeter (DSC) , Graphite nanoplatelets (GNPs) , Insulated gate bipolar transistors (IGBT) , Paraffin , Scanning electron microscopy (SEM) , Thermal conductivity enhancement (TCE)
]
Size effect in gas forming a hot-bent AA5xxx V-shaped trough trimmed for an airplane strakelet skin panel
International Journal of Advanced Manufacturing Technology,
86,
9-12,
2747-2752,
2016-10-01
[
Gas forming,Hot-bending-assisted gas forming,Plastic buckling,Superplastic forming
]
Hot bend assisted gas forming of AA5083 sheet for making V-shaped trough containing deep uneven concavities
Transactions of Nonferrous Metals Society of China,
26,
6,
1546-1554,
2016-06-01
[
hot-bend assisted gas forming (HBAGF),superplastic forming (SPF),three-dimensional finite element analysis (FEA),wrinkle
]
The combination of rolling-and-T6-treatments with Al2O3-reinforcingparticles effect on A6061 metal-matrix composites
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
230,
1,
233-239,
2016-02-01
[
Aluminum matrix composite , Sliding wear , Wear
]
Prior sheet buckling leading to wrinkling formation in a gas forming a V-trough with wavy bottom
Journal of Manufacturing Processes,
21,
101-106,
2016-01-01
[
Gas forming,Plastic buckling,Superplastic forming
]
Explosion characteristics tests for micrometer-sized Ag dust cloud with a concentration of 0.8 g/L
Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an,
38,
8,
1026-1033,
2015-11-17
[
ASTM E1226,explosive,fire
]
Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process
Advances in Materials and Processing Technologies,
1,
3-4,
599-609,
2015-10-02
[
ABS plastics , constitutive equation , Flow stress , temperature effect , thermal forming , uneven thickness
]
Dynamic behavior of a 6069 Al alloy under hot compression
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing,
640,
385-393,
2015-07-09
[
6069 Al alloy,Continuous dynamic recrystallization,Dynamic recovery,Relative softening,Strain-hardening
]
Hot Workability Analysis and Development of a Processing Map for Homogenized 6069 Al Alloy Cast Ingot
Journal of Materials Engineering and Performance,
24,
5,
2051-2059,
2015-05-01
[
6069 Al alloy,dynamic recovery,dynamic recrystallization,efficiency of power dissipation,instability,processing map
]
Effect of potassium substituted for A-site of SrCe0.95Y0.05O3 on microstructure, conductivity and chemical stability
Ceramics International,
41,
2,
2948-2954,
2015-01-01
[
Ceramics,Defects,Electrical properties,X-ray diffraction
]
Flexible four-in-one micro sensor for reliability and 100-hour durability testing
International Journal of Electrochemical Science,
10,
4,
3185-3191,
2015-01-01
[
Flexible four-in-one micro sensor,MEMS,Reliability and durability testing,Thermal shock testing and constant temperature and humidity testing
]
In-situ monitoring of internal temperature, flow rate and pressure in the high-temperature proton exchange membrane fuel cell stack using flexible integrated micro sensor
International Journal of Electrochemical Science,
10,
12,
9885-9892,
2015-01-01
[
Flexible integrated micro sensor,HT-PEMFC stack,In-situ measurement,MEMS
]
Flexible two-in-one micro sensor for integration in vanadium redox flow battery
International Journal of Electrochemical Science,
10,
11,
9766-9774,
2015-01-01
[
Flexible two-in-one micro sensor,MEMS,VRFB
]
Improving bond strength at propellant-liner interfaces
Journal of Guidance, Control, and Dynamics,
38,
6,
1452-1457,
2015-01-01
Interfacial characterization of nickel-yttria-stabilized zirconia cermet anode/interconnect joints with Ag-Pd-Ga active filler for use in solid-oxide fuel cells
International Journal of Hydrogen Energy,
40,
3,
1523-1533,
2015-01-01
[
Interconnect , Joint strength , Solid oxide fuel cell (SOFC)
]
Superplastic forming process applied to aero-industrial strakelet: wrinkling, thickness, and microstructure analysis
International Journal of Advanced Manufacturing Technology,
77,
5-8,
1513-1523,
2015-01-01
[
Hot-bend assisted gas forming (HBAGF) , Superplastic forming (SPF) , Three-dimensional finite element analysis (FEA) , Two-stage gas forming (TSGF) , Wrinkle
]
Characterization of Fe-Cr alloy metallic interconnects coated with LSMO using the aerosol deposition process
Materials Research Bulletin,
51,
63-68,
2014-03-01
[
A. Interfaces,C. Electron microscopy,D. Diffusion,D. Electrical properties
]
Hot deformation behavior and flow stress modeling of annealed AZ61 Mg alloys
Progress in Natural Science: Materials International,
24,
3,
253-265,
2014-01-01
[
AZ61 Mg alloy,Constitutive analysis,Dynamic recrystallization,Flow stress modeling,Strain-dependent constitutive parameters
]
Flexible micro sensors for in-situ diagnosis of proton exchange membrane fuel cell
International Journal of Hydrogen Energy,
39,
32,
18337-18342,
2014-01-01
[
MEMS,Micro flexible sensors,PEMFC
]
Design and analysis of a shock generator
Propellants, Explosives, Pyrotechnics,
38,
6,
825-830,
2013-12-01
[
Explosive,Mil-Std-810F,Shock,SRS
]
Experimental assessments on the resistance to oxidation and Cr evaporation of several Fe-Cr based alloys
Intermetallics,
43,
162-170,
2013-09-03
[
A. Laves phases,B. Electrical resistance and other electrical properties,B. Oxidation,F. Electron microscopy, scanning
]
Two-stage superplastic forming of a V-shaped aluminum sheet into a trough with deep and irregular contour
Journal of Materials Engineering and Performance,
22,
8,
2241-2246,
2013-08-01
[
irregular contour , superplastic forming (SPF) , two-stage SPF , V shape
]
Evaluation of protective La0.67Sr0.33MnO 3-δ coatings on various stainless steels used for solid oxide fuel cell interconnects
Journal of Fuel Cell Science and Technology,
10,
2,
2013-07-22
[
Area-specific resistance,La0.67Sr0.33MnO 3-δ film,Metallic interconnects,Oxide scales,Pulsed-dc magnetron sputtering,Solid oxide fuel cell
]
Strain-dependent constitutive analysis of extruded AZ61 Mg alloy under hot compression
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing,
565,
1-8,
2013-03-10
[
AZ61 Mg alloy,Constitutive analysis,Dynamic recrystallization,Flow stress modeling,Stress multiplier
]
Comparison of oxidation behaviours among three fe-cr based alloys for solid oxide fuel cell interconnect
Energy Materials: Materials Science and Engineering for Energy Systems,
7,
2,
25-30,
2012-12-01
[
Interconnects,Oxide scales,SOFC,Solid oxide fuel cell
]
Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design
Optics and Lasers in Engineering,
50,
12,
1677-1682,
2012-12-01
[
Biconvex membrane lens , Microlens , Spherical aberration , Tunable lens , ZEMAX simulation
]
Gas forming a V-shape aluminum sheet into a trough of saddle-contour
Journal of Materials Engineering and Performance,
21,
11,
2290-2294,
2012-11-01
[
Camel-back,Saddle-contour,SP5083,Superplastic,Twin humps,V-shape
]
An oscillation-free actuation of fluidic lens for optical beam control
,
101,
7,
2012-08-13
Refinement of the primary Si particles in hypereutectic aluminum alloy
Metals and Materials International,
18,
4,
567-571,
2012-08-01
[
Metals,Rolling,Transmission electron microscopy (TEM),Wear,Work hardening
]
Enhancement of Ti-containing hydrogenated carbon (TiC:H) films by high-power plasma-sputtering
Applied Surface Science,
258,
8,
3433-3437,
2012-02-01
[
Diamond-like carbon,High-power pulsed magnetron sputtering,MeDLC
]
Comparison of oxidation behaviours among three Fe-Cr based alloys for solid oxide fuel cell interconnect
Corrosion Engineering Science and Technology,
47,
1,
25-30,
2012-02-01
[
Interconnects,Oxide scales,SOFC,Solid oxide fuel cell
]
Effects of bias on properties of Ti-C:H films coated by filtered cathodic vacuum arc
Surface Engineering,
27,
7,
531-535,
2011-08-01
[
DLC,Filtered cathodic vacuum arc,Metal containing carbon film
]
Strengthening and room temperature age-softening of super-light Mg-Li alloys
Journal of Materials Engineering and Performance,
19,
9,
1235-1239,
2010-12-01
[
heat treating,non-ferrous metals,rolling
]
Deformation characteristics of fine grained magnesium alloy AZ31B thin sheet during rapid gas blow forming
Materials Science and Technology,
26,
9,
1095-1101,
2010-09-01
[
AZ31B mg alloy,gas blow forming,pressurisation profile,strain rate sensitivity
]
Rolling route for refining grains of super light Mg-Li alloys containing Sc and Be
Transactions of Nonferrous Metals Society of China,
20,
8,
1374-1379,
2010-08-01
[
beryllium,Mg-Li alloy,scandium,solid solution strengthening
]
Inter-granular liquid phase aiding grain boundary sliding in superplastic deformation of fine-grained ZK60 Mg alloy
Transactions of Nonferrous Metals Society of China,
20,
SUPPL. 2,
2010-07-01
[
grain boundary sliding,inter-granular phase,Mg alloy,superplastic deformation
]
La0.6Sr0.4Co0.2Fe0.8O3 protective coatings for solid oxide fuel cell interconnect deposited by screen printing
Journal of Alloys and Compounds,
489,
2,
576-581,
2010-01-21
[
Interconnect,Screen printing,Solid oxide fuel cell (SOFC)
]
High temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing
Applied Surface Science,
256,
6,
1817-1824,
2010-01-01
[
Interconnect,Screen printing,Solid oxide fuel cell (SOFC)
]
Oxidation behavior of various metallic alloys for solid oxide fuel cell interconnect
Journal of Fuel Cell Science and Technology,
6,
3,
0310131-0310136,
2009-08-01
[
Interconnect , Oxide scal , Solid oxide fuel cell (SOFC)
]
Performance evaluation of LSM-metallic interconnect composite films prepared by plasma sputtering method
Materials Science and Technology,
25,
5,
582-586,
2009-05-01
[
Fe-Cr alloy , Interconnect , Solid oxide fuel cell (SOFC)
]
Effect of heat treatment on the microstructure and mechanical properties of the consolidated Mg alloy AZ91D machined chips
Journal of Materials Processing Technology,
209,
8,
4194-4200,
2009-04-21
[
Age hardening,AZ91D Mg alloy,Lamellar structure,Solid-state recycling
]
Study of the luminescence of H 2 O and D 2 O ices induced by charged-particle bombardment
Applied Surface Science,
255,
9,
4716-4719,
2009-02-15
[
Ion irradiation on ice,Ion-stimulated luminescence (ISL),Ionbardment
]
Cavitation behavior in superplastic 5083 Al alloy during multiaxial gas blow forming with lubrication
International Journal of Machine Tools and Manufacture,
49,
1,
13-19,
2009-01-01
[
Cavitation,Lubrication,Superplastic 5083 Al alloy,Superplastic forming
]
Mechanical and anisotropic behaviors of Mg-Li-Zn alloy thin sheets
Materials and Design,
29,
10,
2061-2065,
2008-12-01
[
Anisotropy,Formability,Magnesium-lithium alloy
]
Room temperature aging characteristic of MgLiAlZn alloy
Materials Transactions,
49,
11,
2728-2731,
2008-11-01
[
Aging,Magnesium-lithium alloy,Mechanical property,Precipitation
]
Evaluation of glass composites for sealing solid oxide fuel cells
Journal of Ceramic Processing Research,
9,
4,
338-342,
2008-10-10
[
Glass,Interconnect,Solid oxide fuel cell (SOFC)
]
Superplasticity of AA5083 alloy as processed by equal channel angular extrusion
Journal of Alloys and Compounds,
460,
1-2,
305-308,
2008-07-28
[
AA5083 alloy,Equal channel angular extrusion,Grain refining,Mechanical property,Superplasticity
]
Microstructure and mechanical behavior of LZ91 Mg alloy processed by rolling and heat treatments
Journal of Alloys and Compounds,
460,
1-2,
246-252,
2008-07-28
[
Metals,Precipitation,Transmission electron microscopy (TEM),X-ray diffraction
]
Deformation behaviour and formability of LZ90 Mg alloy
Materials Science and Technology,
24,
5,
607-611,
2008-05-01
[
Anisotropy,Forming limit diagram,Forming parameter,Magnesium-lithium alloy
]
Effects of La0.67Sr0.33MnO3 protective coating on SOFC interconnect by plasma-sputtering
International Journal of Hydrogen Energy,
33,
10,
2536-2546,
2008-05-01
[
Interconnect,Plasma-sputtering,Solid oxide fuel cell (SOFC)
]
Deformation behaviour in superplastic 5083 Al alloy during biaxial gas pressure forming with lubrication
Materials Science and Technology,
24,
1,
49-54,
2008-01-01
[
Cavitation,Lubrication,Superplastic 5083 Al alloy,Superplastic forming
]
Depth profiles and concentration percentages of SiO2 and SiOx induced by ion bombardment of a silicon (100) target
Journal of Materials Science: Materials in Electronics,
19,
8-9,
898-901,
2008-01-01
Comparing the hydrogen storage alloys-TiCrV and vanadium-rich TiCrMnV
International Journal of Hydrogen Energy,
32,
16,
3959-3964,
2007-11-01
[
bcc Phase , Hydrogen storage alloy , Laves phase , Microstructure analysis
]
Effect of die surface roughness on deformation characteristics and cavitation during blow forming in a superplastic 5083 alloy
Materials Transactions,
48,
9,
2483-2488,
2007-09-01
[
Cavitation,Superplastic 5083 aluminum alloy,Superplastic forming,Surface roughness
]
Fabrication of a nanoscale single-crystalline silicon thin film on insulator
Electrochemical and Solid-State Letters,
10,
7,
2007-05-21
Light emission of sputtered particles induced by ion bombardment on water-enriched molecular ices
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms,
256,
2,
626-630,
2007-03-01
[
Ion irradiation ices,Light emission induced by ion bombardment
]
Oxidation behavior of some metallic alloys for SOFC interconnect and electrical resistance of the oxide scale formed in hot air
Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao,
28,
1,
117-121,
2007-02-01
[
Interconnects,Oxide scales,Solid oxide fuel cells (SOFCs)
]
Mechanical properties and microstructures of various Mg-Li alloys
Materials Letters,
60,
27,
3272-3276,
2006-11-01
[
Equal channel angular extrusion,Magnesium lithium alloy,Mg-Li-Zn
]
Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming
Journal of Materials Science,
41,
22,
7446-7453,
2006-11-01
Effect of lubrication on deformation characteristics of a superplastic 5083 Al alloy during bi-axial deformation
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing,
427,
1-2,
268-273,
2006-07-15
[
Cavitation,Lubrication,Superplastic 5083 Al alloy,Superplastic forming
]
Effect of Al and Mn content on the mechanical properties of various ECAE processed Mg-Li-Zn alloys
Materials Transactions,
47,
4,
971-976,
2006-04-01
[
Equal channel angular extrusion,Grain refining,Magnesium-lithium-zinc alloy,Superplasticity
]
Recycling the magnesium alloy AZ91D in solid state
Materials Transactions,
47,
4,
1047-1051,
2006-04-01
[
Aging,AZ91D magnesium alloy,Lamellar structure,Solid state recycling
]
The measurement of sputtering yields and spectrum of mass and optical emission of sputtered particles induced by ion bombardment of H2O ice
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms,
240,
1-2,
345-349,
2005-10-01
[
Ion irradiation of ice,Light emissions,Sputtered particles
]
Applications of neural networks for grading textile yarns
Neural Computing and Applications,
13,
3,
185-192,
2004-09-01
[
Dimension reducing,Feature selection,K-L expansion,Neural networks,Relearning process,Textile yarn grading system
]
Mass analysis of sputtered particles induced by Ar bombardment of two iced targets, H2O and CO2
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms,
219-220,
1-4,
323-326,
2004-06-01
[
Ion irradiation on ices,Ion-molecule interaction
]
Angular distribution of sputtered particles induced by ion bombardment
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms,
219-220,
1-4,
221-225,
2004-06-01
[
Collision cascade processes,Ion-surface interaction
]
Grain refining of magnesium alloy AZ31 by rolling
Journal of Materials Processing Technology,
140,
1-3 SPEC.,
588-591,
2003-09-22
[
Magnesium alloy AZ31,Rolling,Superplastic forming
]
Finite element analysis of strain conditions after equal channel angular extrusion
Journal of Materials Processing Technology,
140,
1-3 SPEC.,
583-587,
2003-09-22
[
Double passes,ECAE,FEM,Fine-grained microstructure
]
Effect of lubrication in rapid gas forming of aluminum alloy 5083
Advanced Engineering Materials,
5,
3,
145-148,
2003-03-01
Geometric effects on micropolar elastic honeycomb structure with negative Poisson's ratio using the finite element method
Finite Elements in Analysis and Design,
39,
3,
187-205,
2003-01-01
[
Finite element,Honeycomb,Micropolar,Poisson's ratio
]
Finite element analysis of anisotropic conductive film for chip on glass process
Materials and Manufacturing Processes,
17,
6,
765-781,
2002-11-01
[
Anisotropically conductive film (ACF),Chip on glass (COG),Conducting mechanism,Conductive filler,Finite element analysis (FEA),Finite element method (FEM),IC bump,IC chip,Liquid crystal display (LCD),Resin adhesive,Reverting force,Stress distribution
]
Revitalizing a selectively heat treatable steel plate with ultra hard and tough layers
Materials and Manufacturing Processes,
17,
6,
867-875,
2002-11-01
[
Concentrated residual stress,Finite element analysis,Finite element method,Hadfield,Laminated steel composite,Quenching process,Thermal stress,Three-layered laminate,Ultra hard and tough steel composite
]
Isothermal sheet formability of magnesium alloy AZ31 and AZ61
Journal of Materials Processing Technology,
124,
1-2,
19-24,
2002-06-10
[
AZ31,Isothermal sheet forming,Punch-die pressing
]
Reduction of the concentrated residual stress on the edges of a sandwich plate
Journal of Materials Processing Technology,
123,
3,
371-376,
2002-05-10
[
FEM,Quenching process,Residual stress
]
Isothermal gas forming of Mg alloy AZ31 sheet
Journal of Materials Science and Technology,
18,
3,
227-230,
2002-05-01
[
AZ31 magnesium alloy,Microstructure,Sheet formability
]
Effect of inverted pressurisation profile on deformation characteristics of 5083 aluminium alloy during superplastic forming
Materials Science and Technology,
18,
4,
438-444,
2002-04-01
A Method of Feature Selection for Textile Yarn Grading Using the Effective Distance Between Clusters
Textile Reseach Journal,
72,
10,
870-878,
2002-01-01
Rapid forming of superplastic aluminium alloy 5083
Materials Science and Technology,
17,
11,
1413-1416,
2001-01-01
Effect of bonding variables on bonding mechanisms in press bonding superplastic 8090 aluminium alloy
Materials Science and Technology,
17,
8,
906-911,
2001-01-01
Feasibility and reliability of genuine solid state press bonding of aluminum alloy 5083
Key Engineering Materials,
180 PART 1,
81-86,
2000-01-01
[
Aluminium Alloy 5083,Press Bonding,Solid State Bonding
]
Solid-state bonding of iron-based alloys, steel-brass, and aluminum alloys
Journal of Materials Processing Technology,
75,
1-3,
173-179,
1998-03-01
[
Iron-based alloys,Roll-bonding process,Solid-state bonding
]
Thickness distribution in a superplastically formed rectangular pan under plane-strain conditions
Journal of Materials Processing Technology,
65,
1-3,
59-64,
1997-01-01
[
Sheet metal,Superplastic forming,Thickness distribution,Thin sheet forming
]
Superplastic Forming of an Al-Li-Cu-Mg-Zr Alloy Using Various Forming Paths
Materials and Manufacturing Processes,
10,
3,
519-529,
1995-05-01
Methods for resolving grooving problems in parts manufactured from combined diffusion bonding and superplastic forming processes
Journal of Materials Processing Technology,
45,
1-4,
249-254,
1994-01-01
Comparison of superplastic formabiliity predictions using 2-d plane strain and 3-d modeling
Materials and Manufacturing Processes,
9,
1,
45-58,
1994-01-01
Fracture analysis of a steel sandwich with hardened core
International Journal of Fracture,
65,
2,
173-181,
1994-01-01
Cleavage fracture under tension with constraint
International Journal of Fracture,
60,
3,
221-226,
1993-04-01
Superplastic forming model applications for al-li 8090
Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an,
16,
6,
843-851,
1993-01-01
[
Al-Li 8090,Superplastic forming
]
Impact properties of a laminated composite based on ultrahigh carbon steel and brass
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing,
154,
2,
133-137,
1992-07-15
Feasibility to enhance superplastic forming rate of Al-Li 8090 alloy
Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao,
13,
1,
99-102,
1992-02-01
Impact properties of a laminated composite based on ultrahigh carbon steel and a Ni-Si-steel
Journal of Engineering Materials and Technology, Transactions of the ASME,
114,
3,
278-281,
1992-01-01
Thermal effective stress concentration problems in metal composites
Composites Science and Technology,
44,
1,
71-76,
1992-01-01
[
laminated metal composite,thermal stress
]
Tensile Properties of Laminated Composites Based on Ultrahigh Carbon Steel
Journal of Composite Materials,
25,
7,
842-853,
1991-01-01
Impact properties of a laminated composite based on ultrahigh carbon steel and Hadfield manganese steel
Res mechanica,
31,
3,
233-248,
1990-12-01
Multilayered composites based on ultrahigh carbon steel and brass
Materials and Manufacturing Processes,
5,
3,
363-376,
1990-01-01
Response of the cochlear basilar membrane to rising frequency sweep
Applied Acoustics,
29,
1,
1-13,
1990-01-01
研討會著作
La0.67Sr 0.33MnO3 coating on SOFC interconnect by plasma-sputtering
1261-1267,
2007-12-01
[
Interconnect,Protective coatings,Solid oxide fuel cell
]
Computer simulation in superplastic forming of bonded multiple sheet structures
227-237,
1995-12-01
專書
Materials Science Forum
592-596,
2016-01-01
[
Aluminum alloys,Concavity,Gas forming,Superplastic
]
Advanced Materials Research
240-243,
2013-08-30
[
AZ61 Mg alloy,Efficiency of power dissipation,Instability,Processing map
]
Advanced Materials Research
1387-1391,
2012-03-14
[
AA5083,Camel-back,Saddle-contour,Superplastic,Twin humps,V-groove
]
Advanced Materials Research
1326-1330,
2011-06-06
[
Age softening,Cold rolling,Magnesium-Lithium alloys,Mechanical behaviors
]
國立中央大學